I’ve written and spoken about how to survive all-nighters, but it’s best if we can avoid them in the first place, right?
All-nighters are very unhealthy for you, especially if you find yourself doing them all the time. Working for hours on end, especially overnight, can cause you to make mistakes in your work, can make you sick, and can be seriously dangerous if you’re working on models with knives and machinery without sleep. Here are my tips on how to avoid all-nighters.
Must Have Tools for Existing Conditions Surveys
7 Tips for How to Pass the Architect Registration Exams (ARE's) on a Budget
So... you want to pass the ARE's?
Of course you do! And guess what, you probably don't have to spend $100's to do it.
There are so many paid resources out there, but there are so many more free resources you can take advantage of. So before you go spend hundreds on online ARE courses, books, or other paid content, here are my wallet friendly tips for passing the AREs.
What's a Drafting Brush?
by Chelsea Weibust
Updated 12/05/2018
Who doesn't need a tool to wipe the crumbs off their desk?
When I first started hand drafting I always used my hand to wipe away eraser bits and pencil shavings. I would get so frustrated when the heat from my hand would attract the graphite on the page and spread it all across my drawings! I thought, there has to be a better way!
Soon I came across this tool called a drafting brush. It would glide gently across my drawings, cleaning away all the eraser bits, excess graphite, and heck, even the crumbs scattered across my drawings from eating at my desk! A drafting brush is such a simple tool but an essential one to keep your drawings clean and crisp.
The drafting brush I use: Westcott/C-Thru*
What's an Eraser Pen
Who knew you didn't have to take an Xacto to your erasers to erase with precision!?
Having the right tool for the job is key for productivity. Improvising can work well at times but I've found that improvising can take up valuable time and can lead to unsatisfactory results.
When I was in my earlier years in school I used to use an Xacto or Olfa knife to sharpen my erasers when there was a small area that needed to be fixed or erased. Once I found the eraser pen though, it saved me tons of time and I could see a noticeable difference in the quality of my erasing which is important on final drawings! Watch below to see the eraser pen in action.
Eraser pen I use: Staedtler*
What's a Kneaded Eraser
Who knew there were so many different types of erasers!?
It's vital to know the purpose of different tools and how to use them in different way so you can be more productive. Using the right tool can be the difference between having a great project and potentially having to start a rendering over.
Watch to see what a kneaded eraser is and how to use it.
Kneaded eraser I use: Prismacolor*
What's a Lead Pointer
If you haven't seen last weeks post/video about lead holders, go check that out first!
This week we're talking all about lead pointers - what they are and how to use them. Check out the video to see more!
Here is the lead pointer I use: Alvin Rotary*
What Are My Custom Computer Specifications?
A few years ago I had a friend build a custom computer for me, built to suit my needs. I was so frustrated with the performance and lifespan of the prebuilt computers I’d had before of all prices, brands, mac, pc, you name it. The prebuilt computers just couldn’t perform the way I needed them to so I decided to go the route of custom built computers. Since announcing this transition to the interwebs, I’ve been asked so many times what specification I have for my computer, so here they are!
What's a Lead Holder?
When I was first starting out in architecture I knew close to nothing about what supplies I needed, how to use them, or where to get them. I want to save you the trouble and stress of not knowing these things. This is the first video of a new series called "What's This Thing?" where I will introduce different architecture studio supplies, and terminology and explain what they are and how to use them. In this video we look at a lead holder and lead refills.
Here are the lead holders I use: Kohinoor* and Prismacolor Turquoise*
Here are the lead refills that I use: Prismacolor Turquoise*
The Best Computer for Architecture
The Best Computer for Architecture
Updated 01/01/2019
What is the best computer for architecture students?
I have been getting A TON of questions about this! Typically, I advise people to review school requirements and do a little bit of research - I still stand by that philosophy for the most part. While I do think it's important to understand what your school requires you to have in terms of computer specifications, here I suggest a different path. Watch to find out!
Also see my computer specifications here to build your own custom computer!
Studio Vlog 8 // Part 1
I was able to live out a childhood dream where I was able to build a Lego model for my studio project! My studio project is based around sustainability and is constructed entirely out of wood. Here I bring you into my Sketchup model so you can see the massing of my building and see the logic behind some of the decisions I made. I also show you into the more technical drawings in AutoCAD, figuring out my panelized wall systems for the modular units.
How to Apply for Jobs and Internships in Architecture
For most people, the reason you study architecture is so you can earn your degree and pursue a career in the field. There is A TON of competition out there with school's architecture programs growing every year. Help yourself stand out from the crowd and get that job!
There are 4 essential, physical things you will need to apply for jobs and internships in architecture.
1. Cover letter
2. Resume
3. Portfolio
4. Teaser portfolio (bonus)
Find out what they are and how to use them to your advantage!
Where to Buy Architecture Materials and Supplies
When I was starting out in architecture I was clueless about where to buy supplies for school. Furthermore, I like to shop around when I'm buying things so I can explore my options, comparing price and quality. Here I give you 6 suggestions for doing architecture on a budget!
6 Tips for Staying Focused in Studio
The architecture design studio is a magical place with tons of people and it holds with it an energy that's hard to explain. The studio is a great space to get inspiration; however, it can be a terrible place to actually get work done! There are so many noises and people around and just about every distraction you can imagine. That being said, there are actions you can take to get yourself in the "getting work done" mindset - here are 6 tips I use daily to get myself focused in studio!
1. Noise cancelling headphones
2. Organize your desk
3. Turn off phone wifi +/ data
4. Take a break
5. Stay hydrated + well-fed
6. Make prioritized to do list(s)
Studio Vlog 7
Since I'm taking a timber studio, we took a field trip to different wood manufacturing factories to see exactly how the wood that we build with is cut, glued, transported, and everything in between! This was one of my favorite field trips yet, come along with me for the ride!
Studio Vlog 6
Ever wonder what a day in the life of an architecture student looks like? Look no further! Here I went around for a day filming everything from organizing a critique list for studio desk crits with some friends, to driving around town, to showing some of the projects I've been working on! Hope you like it!
Sustainable Strategies - Louvers and Sun Shading Part 4
One of the most expensive building costs is the mechanical system used for heating and cooling the building. This applies to the cost of the system itself along with the cost of running and maintaining it. One way to lessen these costs is by using smart design and incorporating low tech louver systems to help regulate the amount of heat gain in the summer and take advantage of the sun in the winter. Here, in part 4 of the series you'll learn about different ways to achieve these results.
Sustainable Strategies - Louvers and Sun Shading Part 2
In this video we dig a little deeper into the sun diagram, identifying different effects that lighting can have on your building based on its orientation to the sun. Here we talk about the types of shading you should use based on the direction the sun is coming from.
Architecture Studio Supplies
I bet you're wondering what supplies you'll need for your architecture studio. Schools don't always tell you exactly what supplies you need (often until the day you need them) and you'll find yourself scrambling at the last minute to finish your assignments. Watch the video below to see the essential supplies you'll need get by and thrive in studio!
These are some of the supplies I use:
I like to use a smaller sketchbook that I can carry around with me. Usually I'll use a 5x8 sketchbook with gridded pages.
For architectural scales, I prefer to have a metal scale over plastic since they won't damage as easily. I also suggest getting both a full size scale and a smaller travel size scale that you can carry around with you.
A parallel ruler is a straight edge that slides vertically on your drafting table to help you draw straight lines while drafting.
You'll want a couple of different sizes of rolls of trace for when your drafting and sketching.
An Olfa knife is a more heavy duty knife used to cut thicker materials like chipboard and plexy while making models.
Replacement Olfa Knife Blades*
One of the most dangerous things people do when making models is use dull blades while cutting materials. Also make sure to have lots of replacement blades while building models.
An X-acto knife is a light duty knife used to cut thinner materials like paper but like with olfa knives, make sure to always use a sharp blade.
In addition to being a ruler, this straight edge has a raised edge to protect your fingers when cutting with a blade along the ruler. It also has a non slip grip on the bottom so it won't slide around.
Hot glue guns are what you'll be using on study models or in places on final models that you wont see.
It's always a good idea to have a backup of glue refills for your guns.
Easy cutters a perfect for cutting things like balsa wood and wooden dowels. There are angle markers to help make cuts at different angles.
These are my favorite pens because they dry quickly and don't require any pressure to write. I use these for sketching and drafting.
Prismacolor markers are my favorite markers to do hand renderings with. These markers are great because they're double sided with a broad side for when you want broad strokes and a point side for when you need to be more accurate.
This is my favorite toolbox because it's compact, lightweight, and has lots of compartments to organize all my tools.
It's always a good idea to have a screwdriver with different heads for things like assembling your parallel ruler.
Especially when first starting out, it's useful to get a set of pencils with varying hardnesses for drafting by hand. This way you can experiment with different pencils and see which work best for you. Helpful tip: HB = #2 = medium hardness.
Lead holders are basically mechanical pencils that have refillable lead. I recommend having at least 3 different colored lead holders with different types of lead so you can easily switch between them while drafting.
A lead pointer is what you'll use to sharpen your lead. Use the two smaller holes on either side of the white pad to control the length of the tip. Place the tip in the larger hole and spin the top around until sharpened, then dip the tip into the white felt pad to wipe off the dust.
I like to use kneaded erasers to control lineweights and when working with charcoal. You usually want to dab on a surface to pickup the graphite or charcoal so as to not smudge the work. To clean the eraser you stretch and knead it and can rip off smaller pieces when working with smaller areas then morph it all back together again.
Gum erasers work well for erasing colored pencils and graphite without leaving smudges.
Plastic erasers are used for general purposes. These are my favorite erasers because they'll erase just about everything and don't smudge.
Eraser pens/sticks are useful when erasing small areas like when lines are close together.
It's always a good idea to have eraser refills.
For areas where you don't have much wiggle room for erasing it can be really useful to have an electric eraser to do the erasing work for you without the fear of ruining the rest of your drawing with erasing strokes.
Electric erasers are small and you go through them pretty quick so I suggest having backups on hand.
Eraser shield are thin metal sheets with different sized and shaped holes that's placed over your drawing to protect the areas around what you're erasing.
Cutting Mat* (one large one small can be helpful!)
Cutting mats double as both a working surface for assembling models and a safe cutting surface that won't damage your desk. Look for "self healing" mats that will mend and hide the cut marks on the mat. I suggest having a large and a small mat.
All purpose glue is a great basic glue for building models, just make sure whatever glue you use that it dries clear.
An adjustable triangle is great because it can be adjusted to any angle.
In addition to an adjustable triangle, I'd suggest having fixed triangles too so you can quickly switch between them and work more quickly. I'd recommend 30-60-90 and 45-45-90 angled triangles.
Drafting dots are round shaped pieces of light adhesive tape that wont tear your drawings.
Drafting tape is an alternative to using drafting dots. It's a light adhesive tape that wont tear your drawings.
A drafting brush is a soft bristled brush that you can use to brush debris off your drawings without smudging them.
A Vyco drawing mat covers your desk to provide a smooth surface for drafting or sketching.
An architectural desk lamp can be mounted to any table without taking up any desk space.
A portable drafting board is great if you want to be able to draft anywhere.
